LOGOM
MDP0461CHINA90X90MDP0460CHINA90X90MDP0467CHINA90X90MDP0464CHINA90X90
metco-logobianco

facebook
instagram

METCO SRL

COMPANY

INFO & CONTACTS

Schermata2019-07-26alle16.37.08

Head Office - Administrative Office -Production 

Via G. Galilei 4 40053 Valsamoggia, Loc. Monteveglio - BO - Italy 

Ph +39 051 830393 Fax +39 051 830066 

info@metco.it 

Metco is a leading company in the field complex penetrating metals for porcelain tile decoration.

Developed by FLAZIO EXPERIENCE

WWW.METCOITALIA.COM @ ALL RIGHT RESERVED 2018

Digital Solvent Soluble Inks | The only possible technical granite digital decoration

SINKMET

Digital color, produced in Italy, which revolutionizes the way of decorating the porcelain

expand-button.svg
MDP0465CHINA90X90
adam-birkett-256243-unsplash

METCO

FIND MORE COMPANY | Since 1990, the specialists of the digital coloring

Metco was founded in 1990 to produce metals complexed penetrant, suitable for the decoration of Stoneware and Porcelain. Since December 1998, in Fiorano Modenese, Metco has established a permanent research centre, initially dedicated to the applications rotocolor printing then evolved in digital applications.
The research center, Metco is able to perform all duties required of a supplier at the forefront.

UOMOCOPERTINAa
tatoo

Our products

Check out THE CATALOGUE of | A wide range of colors for you

magazinemockupcover

DOWNLOAD CATALOGUE

iconaITA
iconaCN
iconaENG
iconaBR
iconaES

92,4 %
2,0 %

5,0 %

0,5%

0,1%

SUBSCRIBE TO THE NEWSLETTER

Stay up to date on all the latest news and promotions on products Metco

The addition of promoters chromophores in the mixture of the customer makes to obtain substantial performance from the point of view of the development color, significantly expanding the colour Gamut. These additives can be added either in the liquid phase (slip) of the mixture, which in the initial charging of the mill.


As A result of this preparation will make it possible to have two types of applications:


The first (and most obvious liquid) application directly to the ceramic body through the use of supply chain pressure (application of at least 400-600 microns) while the second one (with different destination of use) once
spray the slip is then applied as a double layer all the dry double-loading.
You will always and surfaces “TECHNICAL” with a hardness similar to the Technical Porcelain pure, easy cleanability of the surface and a very high resistance to scratching due to the absence of fragile materials such as glass (typical instead of the glazed products made by other manufacturers of inks).
Subsequent finishes, Honed or Polished, thus giving it an added value that assimilates these artifacts to natural marble, both for aesthetics and for the variety of colours.


The typical configuration of the line, if you choose to apply the Slip modified with Metox directly by supply chain pressure (liquid), is the following:


-glazing line of at least 80-120 mt
-at the exit from the dryer after pressing it is necessary to cool the surface of the tile using a jet of water with an airless
- application of Slip changed with Metox through a chain of pressure (500-700 gr/sqm
the dry product divided into 2 applicators)
-a baby walker place between the sectors will rotate the tile by 90° (to avoid the effect of the vertical line)
-after the deposition of the layer you need to scrape the edges and proceed to dry the surface of the tile, which can be accomplished in these ways:
- bring the artifact in a kiln to more than plans for at least 3-5 minutes (drying or forced)
- leave to cross an empty space of the line (at least 80 metres)
- preventing the influence of water that the medium is absorbing.

Create a website